CRC++

Easy to use and fast C++ CRC library.

Tired of writing CRC code over and over again? Don't want to include a dozen boost header files just for a little bit of functionality? CRC++ is a portable and extremely lightweight alternative that is incredibly simple, fast, and clean.

Features

CRC++ supports bit-by-bit and byte-by-byte calculation of full and multipart CRCs. The algorithms used are highly optimized and can even be configured to be branchless (as always, be sure to profile your code to choose the most efficient option). CRC++ is a great option for embedded C++ projects with a need for efficiency.

CRC++ consists of a single header file which can be included in any existing C++ application. No libraries, no boost, no mess, no fuss.

Any CRC width is supported - even CRCs larger than 64 bits, provided there is an integer type large enough to contain it. Trying to compute a 57-bit CRC? Got you covered.

Many common CRCs are provided out-of-the-box, such as CRC-32 (used in PKZip and Ethernet), CRC-XMODEM, and CRC-CCITT.

CRC++ will compile with any reasonably compliant C++03 or C++11 compiler. Compiling with C++11 is recommended, as it allows a number of static computations to be performed at compile-time instead of runtime.

All of the CRC++ code is well-documented. Unit tests are included in the repository (g++ Makefile and Visual Studio 2015 projects included). HTML documentation can also be produced via Doxygen (also included in the repository).

Comparison

CRC++ boasts one of the fastest and most memory efficient generic CRC implementation available. The below table shows performance comparisons across multiple implementations and platforms.

Additionally, CRC++ has the most features of any library and the smallest code footprint:

Usage

Computing a CRC is as simple as the following code:

#include "CRC.h" // Only need to include this header file!
                 // No libraries need to be included. No project settings need to be messed with.
				 
#include <iomanip>  // Includes ::std::hex
#include <iostream> // Includes ::std::cout
#include <cstdint>  // Includes ::std::uint32_t

int main(int argc, char ** argv)
{
	const char myString[] = { 'H', 'E', 'L', 'L', 'O', ' ', 'W', 'O', 'R', 'L', 'D' };
	
	std::uint32_t crc = CRC::Calculate(myString, sizeof(myString), CRC::CRC_32());
	
	std::cout << std::hex << crc;
	
	return 0;
}

Multi-part CRCs are also supported:

int main(int argc, char ** argv)
{
	const char myHelloString[] = { 'H', 'E', 'L', 'L', 'O', ' ' };
	const char myWorldString[] = { 'W', 'O', 'R', 'L', 'D' };
	
	std::uint32_t crc;
	
	crc = CRC::Calculate(myHelloString, sizeof(myHelloString), CRC::CRC_32());
	crc = CRC::Calculate(myWorldString, sizeof(myWorldString), CRC::CRC_32(), crc);
	
	std::cout << std::hex << crc;
	
	return 0;
}

This will return the same CRC as the first example.

If you need to compute a CRC on an input that is not a multiple of CHAR_BIT (usually 8 bits), use the CalculateBits() function instead:

int main(int argc, char ** argv)
{
	const unsigned char data[] = { 0x98, 0x76, 0x54, 0x32, 0x10 };
	
	// Second argument is the number of bits. The input data must
	// be a whole number of bytes. Pad any used bits with zeros.
	std::uint32_t crc = CRC::CalculateBits(data, 37, CRC::CRC_32());
	
	std::cout << std::hex << crc;
	
	return 0;
}

The above examples compute a CRC bit-by-bit. However, CRC++ also supports lookup tables, as the following example demonstrates:

int main(int argc, char ** argv)
{
	const char myHelloString[] = { 'H', 'E', 'L', 'L', 'O', ' ' };
	const char myWorldString[] = { 'W', 'O', 'R', 'L', 'D' };
	
	CRC::Table<std::uint32_t, 32> table(CRC::CRC_32());
	
	std::uint32_t crc;
	
	crc = CRC::Calculate(myHelloString, sizeof(myHelloString), table);
	crc = CRC::Calculate(myWorldString, sizeof(myWorldString), table, crc);
	
	std::cout << std::hex << crc;
	
	return 0;
}

Or, if you prefer using the auto keyword:

int main(int argc, char ** argv)
{
	const char myHelloString[] = { 'H', 'E', 'L', 'L', 'O', ' ' };
	const char myWorldString[] = { 'W', 'O', 'R', 'L', 'D' };
	
	auto table = CRC::CRC_32().MakeTable();
	
	std::uint32_t crc;
	
	crc = CRC::Calculate(myHelloString, sizeof(myHelloString), table);
	crc = CRC::Calculate(myWorldString, sizeof(myWorldString), table, crc);
	
	std::cout << std::hex << crc;
	
	return 0;
}

Lookup tables are much faster than computing a CRC bit-by-bit, at the expense of extra memory usage. A lookup table can be reused for as many CRCs as desired until it goes out of scope.

Configuration

CRC++ can be configured by setting various #defines before #include-ing the CRC++ header file:

• #define crcpp_uint8 Specifies the type used to store CRCs that have a width of 8 bits or less. This type is not used in CRC calculations. Defaults to ::std::uint8_t.
• #define crcpp_uint16 Specifies the type used to store CRCs that have a width between 9 and 16 bits (inclusive). This type is not used in CRC calculations. Defaults to ::std::uint16_t.
• #define crcpp_uint32 Specifies the type used to store CRCs that have a width between 17 and 32 bits (inclusive). This type is not used in CRC calculations. Defaults to ::std::uint32_t.
• #define crcpp_uint64 Specifies the type used to store CRCs that have a width between 33 and 64 bits (inclusive). This type is not used in CRC calculations. Defaults to ::std::uint64_t.
• #define crcpp_size This type is used for loop iteration and function signatures only. Defaults to ::std::size_t.
• #define CRCPP_USE_NAMESPACE Define to place all CRC++ code within the ::CRCPP namespace. Not defined by default.
• #define CRCPP_BRANCHLESS Define to enable a branchless CRC implementation. The branchless implementation uses a single integer multiplication in the bit-by-bit calculation instead of a small conditional. The branchless implementation may be faster on processor architectures which support single-instruction integer multiplication. Not defined by default.
• #define CRCPP_USE_CPP11 Define to enables C++11 features (move semantics, constexpr, static_assert, etc.). Not defined by default.
• #define CRCPP_INCLUDE_ESOTERIC_CRC_DEFINITIONS Define to include definitions for little-used CRCs. Not defined by default.

Build

CRC does not require a build for basic usage; simply include the header file in your project.

Unit tests and documentation can be built manually with the project files provided or automatically with CMake.

To build documentation manually:

cd doxygen
doxygen Doxyfile.dox

To build unit tests manually via Make:

# Build
cd test/prj/gcc
make [debug|release]
# Run unit tests
bin/unittest

Project files and solutions for Visual Studio 2015, 2017 and 2022 are provided in test/prj. Simply open the solution file and run the project; no additional configuration should be necessary.

CMake can also be used to build the documentation and unit tests. An out-of-source build is recommended. In this example, we will do an out-of-source build in the build directory:

mkdir -p build
cd build
cmake .. [-DBUILD_DOC=ON]
# Build and run unit tests
make tests
# Build documentation
make doxygen
# Install header file
sudo make install

Unit tests are built by default. Enable the BUILD_DOC CMake flag to also build documentation (requires Doxygen).

Documentation

https://d-bahr.github.io/CRCpp/

License

CRC++ is free to use and provided under a BSD license.

References

Catalog of CRCs: https://reveng.sourceforge.io/crc-catalogue/

5G-NR Specification 3GPP TS 38.212: https://www.etsi.org/deliver/etsi_ts/138200_138299/138212/15.03.00_60/ts_138212v150300p.pdf

USB 2.0 Specification: https://www.usb.org/document-library/usb-20-specification